News
How does the daily production process maintain the brick machine?
1.To install or replace new and old molds, avoid collision, clash, civilized assembly, and protect the mould;
2. Check the mold size in use, the condition of welding combining site, weld cracking, shall promptly repair, wear too quickly to adjust the aggregate size, excessive impact of the products quality are subject to match the new mould
3. The clearance is carefully adjusted, including the pressure head and die core, the pressure head and the moving plane of the hopper, and the space between the mold frame and the line plate. The relative motion shall not interfere and rub;
4. When cleaning the mold, use air compressor and soft tool to remove the concrete residue.
2. Check the mold size in use, the condition of welding combining site, weld cracking, shall promptly repair, wear too quickly to adjust the aggregate size, excessive impact of the products quality are subject to match the new mould
3. The clearance is carefully adjusted, including the pressure head and die core, the pressure head and the moving plane of the hopper, and the space between the mold frame and the line plate. The relative motion shall not interfere and rub;
4. When cleaning the mold, use air compressor and soft tool to remove the concrete residue.
5. Replace the mold, clean, oil and rust protection, should be dry, flat on the cushion, to prevent gravity deformation.
Leave Message
If you have any problems or questions about our products or need our support and assistance, please feel free to write us, we will reply to you within 24 hours, and never reveal your information to the third party. Thank you!
PRODUCTS SEARCH
Quickly find productPRODUCTS LIST
- QMJ-10A Egg-laying Block Ma...
- QTY4-30 Egg Laying Block Ma...
- QTJ4-40 Semi-auto Block Mak...
- QTJ4-35 Semi-auto Block Mak...
- QTJ4-26 Semi-auto Block Mak...
- QTJ4-25 Auto Block Making M...
- Concrete Mixing Pump
- Trailer Concrete Pump
- HY600 Self-loading Concrete...
- HY400 Self-loading Concrete...
